Goldline AQL-PS-4 User Manual download pdf (Page 20)

Super Chlorinate

The Aqua Logic can be programmed to Super Chlorinate the pool or spa while running a group command.

When the Group starts, the Super Chlorinate cycle will begin. Super Chlorinate will continue until the

preset time expires (see Timers Menu/Super Chlorinate Hours) or until the Group turns off. Changing the

Super Chlorinate state using the Settings Menu, the Aqua Pod Super Chlorinate button, or a Super Chlo-

rinate assigned Aux/Lights/Valve button will temporarily cancel the Group’s control of Super Chlorinate

until the next time the Group is activated.

PS-8 and PS-16 Virtual Models

Aqua Logic Virtual models are similar to standard PS models, but offer additional auxiliary outputs with

limited functionality. The AQL-PS-8-V is similar to the AQL-PS-4 with 4 additional Aux outputs. The

AQL-PS-16-V is similar to the AQL-PS-8 with 8 additional outputs. The additional aux outputs on virtual

models can only be assigned to the Super Chlorinate function (if the Chlorinator is enabled) or to a Group

function. Refer to the following programming information when assigning functions to the virtual auxiliary

outputs.

Configuration Menus

Each item needs to be programmed and may contain additional sub-menu items. Refer to the following

pages for information on programming.

Cell Type

T- CE LL- 1 5

Toggle between T-CELL-5 and T-CELL-15

Move to next menu item

Chlorinator

Enabled

Display

Salt

Chlor. Config.

+ to view/change

Toggle between Enabled (default) and Disabled

Chlorinator

Toggle between Display Salt (default) and Minerals

Move to next menu item

Move to previous/next configuration menu

Move to next configuration menu

Push to access Chlorinator option

Chlorinator

If the chlorinator is enabled (requires the use of the AQL-CL chlorination kit), then the cell

and flow switch must also be installed and the Aqua Logic will automatically chlorinate both

the pool and spa according to the desired output setting (see Settings Menu in the Operation

manual). If disabled (default), then neither the cell nor flow switch need to be installed and

all displays relating to the chlorinator will be suppressed.

When the chlorinator is enabled, the Aqua Logic will automatically detect and control any

Aqua Rite(s) that is installed in the system (see page 21).

Display

Allows for the display of salt (default) or mineral values.

Cell Type Selection

The Cell Type Menu appears after “Display Salt/Minerals” in the Chlorinator Configuration

Menu. The options are T-CELL-5 or T-CELL-15 (default). Make the proper selection based

on the electrolytic cell that is used in your system. For pools up to 20,000 gallons, the T-

CELL-5 is typically used. The T-CELL-15 is for pools up to 40,000 gallons.

AQL-PS-8-V models only: Aux3 - Aux7 only

AQL-PS-16-V models only: Aux7 - Aux14 only

Aux7 Config.

+ to view/change

Aux7 Function

Group

Aux7 Group

Filter: Unaffected

Aux7 Group

Timer: None(Manual)

Push to access Virtual Aux options

Rotates between Super Chlorinate, Group and Manual On/Off

Options available depend on the function that is selected

Rotates between Manual On/Off (default),Countdown Timer and Timeclock

Move to previous/next configuration menu

Move to next menu item

Move to previous/next menu item or next configuration menu

Move to next configuration menu item

Aux7 Name

Cleaner

Rotates between all available names

Move to next menu item

For more information on the Group function, refer to page 22 in the Installation Manual. If neither Super

Chlorinate or a Group can be assigned to a Virtual Aux button, the following will be displayed:

No Virtual

Functions Available

NOTE: The configuration for Valve3 and Valve4 are identical. However, if Heater2 was enabled, then the Valve4

configuration will not appear (a single relay is used to implement either the Heater2 function or the Valve4 function-

-it can not do both). For PS-16, see aux logic on page 31 for control of Valves7, 8, 9 and 10.

Valve3 Freeze

Disabled

Toggle between Enabled and Disabled (default) Valve3 Freeze

Move to previous/next configuration menu

for all functions except group

Valve3 Config.

+ to view/change

Valve3 Function

Solar

Valve3 Name

Waterfall

Push to access Valve3 options

Rotates between Manual On/Off (default), Countdown Timer,

Timeclock, Solar, In-floor Cleaner, Group, and Super Chlorinate

Move to previous/next configuration menu

Move to next menu item

Valve3 Interlock

Disabled

Toggle between Enabled and Disabled (default) Valve3 Interlock

Move to next menu item

for all functions except solar and group

Rotates between all available names

Move to next menu item

Valve3 Group

Filter: Unaffected

Valve3 Group

Timer: None(Manual)

Options available depend on the function that is selected

Rotates between Manual On/Off (default),Countdown Timer and Timeclock

Move to previous/next menu item or next configuration menu

Move to next menu item

for group function only

Valve3 Name

The Aqua Logic allows you to assign any one of a number of names (e.g. “Cleaner Valve,

Waterfall valve, Solar Valve, etc.) to each of the valve output control function. This will make

the Aqua Logic much more user friendly to the homeowner when they want to turn various

valves on or off or program the timeclocks. A sheet of small name labels is included with the

Aqua Logic main unit and each remote display/keypad so that the “Valve3” (and “Valve4”)

pushbutton can be labeled the same as the name that you have assigned.

Valve3 Function

Manual On/Off (default) – the valve3 relay will alternate between turning on and off when

the VALVE3 button is pressed. There is no automatic control logic. The VALVE3 button can

also be used to turn the valve output on or off.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 45 46

Comments to this Manuals

No comments

Goldline AQL-PS-4 User Manual Page 20

Comments to this Manuals

Related products and manuals for Above ground pool accessories Goldline AQL-PS-4